Featured

  • China wholesale Colour Double Ends Bolts - 3pcs-Sheild Anchor – Sunshow

    China wholesale Colour Double Ends Bolts - 3pcs-Sheild Anchor – Sunshow

    3pcs-Heavy Duty Anchor&Bolt are a quick, simple, and adaptable masonry anchoring system. They are designed for application on a range of materials and for applications exposed to seismic loads. When the bolt of the fastener is tightened, it expands against the base material to create a strong connection and is able to distribute load-bearing weight.It is composed of a wall pipe, hexagon bolt, ribbed nut, and flat pad. The bolt thread is the full thread. 3pcs-Heavy Duty Anchor&Bolt are...
  • 18 Years Factory Other fastener - Drywall Screw – Sunshow

    18 Years Factory Other fastener - Drywall Screw – Sunshow

    Drywall Screws are also known as sheetrock screws, plasterboard screws, multipurpose Phillips head wood screws. If used as an all purpose wood screw, use for interior application. Black/Gray phosphate coating. Drywall screws have become the standard fastener for securing full or partial sheets of drywall to wall studs or ceiling joists.Drywall screws’ lengths and gauges, thread types, heads, points, and composition at first might seem incomprehensible. Coarse drywall screws feature coar...
  • factory Outlets for Motor Lubricant Oil - gear oil – Sunshow

    factory Outlets for Motor Lubricant Oil - gear oil – Sunshow

    Gear oil mainly refers to the lubricating oil of the transmission and rear axle. There are differences between it and engine oil in terms of use conditions, its own composition and performance. Gear oil mainly plays the role of lubricating gears and bearings, preventing wear and corrosion, and helping gears to dissipate heat. Automobile gear oil is used in gear transmission mechanisms such as automobile steering gears, transmissions, and drive axles. Due to the high surface pressure during ge...
  • Low MOQ for Din 912 - Ring Nut – Sunshow

    Low MOQ for Din 912 - Ring Nut – Sunshow

     Ring Nut integral forging, and after normalizing treatment and remove oxide skin; Forgings without over – burning, crack defects; The Ring Nut are uniformly hardness tested, Application:Lifting Fittings  
  • Hot Selling for Engine Lube Oil - Diesel engine oil – Sunshow

    Hot Selling for Engine Lube Oil - Diesel engine oil – Sunshow

    Diesel engine oil is the lubricating oil used in diesel engines. Diesel engine is an abbreviation of diesel engine, which is an engine with large torque, high efficiency and good economic performance. The source of its energy is the combustion of diesel oil. The application prospect of diesel engines is very broad, and the global diesel engine application market has shown steady growth. Many people use diesel engines every day, but do not know how to maintain them. In fact, the maintenance of...
  • Professional Design Ceramic Bearings And Parts - Thrust ball bearing – Sunshow

    Professional Design Ceramic Bearings And Parts - Thrust ball bearing – Sunshow

    Thrust ball bearings are designed to withstand thrust loads during high-speed operation, and are composed of washer-shaped ferrules with ball rolling grooves. Because the ring is in the shape of a cushion, thrust ball bearings are divided into two types: flat base cushion type and self-aligning spherical cushion type. In addition, this kind of bearing can bear axial load, but cannot bear radial load.
  • Reasonable price for DIN979 - 4pcs-Sheild Anchor – Sunshow

    Reasonable price for DIN979 - 4pcs-Sheild Anchor – Sunshow

    4pcs-Heavy Duty Anchor&Bolt are a quick, simple, and adaptable masonry anchoring system. They are designed for application on a range of materials and for applications exposed to seismic loads. When the bolt of the fastener is tightened, it expands against the base material to create a strong connection and is able to distribute load-bearing weight.It is composed of a wall pipe, hexagon bolt, ribbed nut, and flat pad. The bolt thread is the full thread. 4pcs-Heavy Duty Anchor&Bolt are...
  • Manufactur standard Hexagon Head Bolt - Hex Nut – Sunshow

    Manufactur standard Hexagon Head Bolt - Hex Nut – Sunshow

    Hex Nut is used with bolts and screws to connect and tighten the parts.Among them, type I hexagon nut is the most widely used. Class C nut is used for machines, equipment or structures with rough surface and low precision requirements.Class A and class B nuts are used on machines, equipment or structures with relatively smooth surfaces and high precision requirements.The thickness m of type II hexagon nut is thicker, which is mostly used in the occasions when installation and disassembly are ...
  • Good Wholesale Vendors Nut Bolt - Rivet Nut – Sunshow

    Good Wholesale Vendors Nut Bolt - Rivet Nut – Sunshow

    Suitable for fastening of various thickness plates and pipes (0.5mm -6MM). Use pneumatic or manual riveting gun to rivet once, convenient and firm; Replace the traditional welding nut, to make up the metal sheet, thin pipe welding fusible, welding nut is not suitable.
  • Factory wholesale Skateboard Bearings - Cylindrical Roller Bearings – Sunshow
  • factory low price DIN934 - Hex Head Bolt – Sunshow

    factory low price DIN934 - Hex Head Bolt – Sunshow

    Specification:Hex Head Bolt is a type of fastener used for making mechanical connections between mating objects.They are widely used in Industrial manufacturing, Daily life, etc. These have good chemical resistance and may be mildly magnetic. Length is measured from under the head. Match the thread spacing of mating components. Coarse threads are the industry standard; Fine and extra-fine threads are closely spaced to prevent loosening from vibration; the finer the thread, the better the res...
  • 2021 New Style Interconnect Cable - Power Cable 22 – Sunshow

    2021 New Style Interconnect Cable - Power Cable 22 – Sunshow

    Use characteristics 1. The highest rated temperature of the cable conductor is 90°C. When a short circuit (the longest duration does not exceed 5S), the highest The temperature does not exceed 250°C. 2. The ambient temperature when laying the cable should not be lower than 0°C 3. Allowable bending radius during laying: single-core cable is not less than 15 times the outer diameter of the cable; multi-core cable is not less than 10 times the outer diameter of the cable. Model name usage condit...